TL;DR
The lifetime of your car wrap is affected by factors such as sun exposure, temperature, and cleaning frequency.
A car wrap’s typical lifetime is roughly five years under normal circumstances.
For the finest and longest-lasting effects, have your car wrap placed by expert technicians like Melbourne Car Wraps.
Washing wrapped automobiles may be a challenge, but washing the vehicle by hand using a non-abrasive cleaner and a soft cloth will assist in reducing the risk of damaging the wrap.
If you must pressure wash your business fleet cars, keep the water pressure below 800-2000 psi and keep a minimum of 30-40cm between your vehicle and the pressure washer.
Bring your car wrap to a professional to remove and replace without harming your vehicle’s paint if it is showing signs of wear or needs a design update.
So you took the plunge and got a vehicle wrap for your automobile to promote your brand. So, what’s next? Vehicle wraps provide excellent promotional value for your company, and if properly maintained, they may endure a long time.
You won’t have to worry about the wrap’s durability when put correctly, but there are a few things to keep in mind if you want it to endure a long time.
WHAT IS THE LONGEVITY OF A VINYL WRAP?
This is a regular question we hear from clients, and it’s understandable—you’ve spent marketing dollars in a car wrap and want to know how much money you’ll get back. The answer is dependent on a lot of variables, including sun exposure, climate, washing frequency, and so on.
Wraps don’t stay as long on cars driven every day and exposed to the sun. With this level of wear and tear, the life expectancy might be as low as two years. Even something as basic as parking in the shade will significantly extend the life of your car wrap, bringing it to about three or four years. Wraps on vehicles used less often may last up to seven years. A car wrap’s typical lifetime is roughly five years under normal circumstances.
The installation technique is another issue that might affect the wrap’s longevity. A poorly put wrap might rapidly begin to exhibit symptoms of wear, such as peeling or becoming filthy beneath the wrap. Choose a professional firm specializing in car wraps, such as Pixus, for the best and longest-lasting effects.
WRAP AN EXTENSION OF A VEHICLE’S LIFE
The best approach to prolong the life of your vehicle wrap and get the most value out of your investment is to take proper care of it. Keeping your car clean and parking in a garage or a shady place might prevent damage to the wrap.
Small bubbles might occur in the wrap after exposure to harsh temperatures or other severe circumstances, usually during the first several weeks. If you see bubbles like these, don’t push on them or try to mend them yourself. It’s preferable to return your car to the location where it was wrapped and allow the installation pros to resolve the issue with a little heat.
TAKING CARE OF A CAR THAT HAS BEEN WRAPPED
With wrapped autos, washing is a major challenge. You want the car to be clean to keep it looking professional and to help the wrap last longer, but frequent or poor washings may shorten the life of a vehicle wrap. Here are some suggestions for keeping your covered vehicle in good condition:
- Hand-wash the car using a non-abrasive cleaner.
- Use a gentle cloth or sponge to clean the surface.
- In the car, avoid using powerful solvents.
- Avoid vehicle washes that use automated brushes because they might raise loose edges, damage the surface, and fade the laminate.
- As far as possible, avoid pressure washing.
- If you want further protection, use Teflon or silicone-based polishes, but stay away from carnauba-based waxes.
- Don’t apply any wax or shine on matte, textured, or customized wraps.
- Spills should be cleaned up as quickly as possible.
- To eliminate road filth and bugs, try a citrus-based degreaser or cleaner, but first, test all products in a hidden location.
- Scrubbing with a rough bristle brush is not recommended.
WASHING A WRAPPED VEHICLE WITH PRESSURE
Because excessive pressure might harm graphics, pressure cleaning is not suggested. However, this may be the only viable alternative for certain business fleets. Follow these tips if you need to pressure wash a wrapped car to help decrease the risk of damage:
- Set the water pressure to no more than 800 psi and 2000 psi.
- Maintain a water temperature of fewer than 180 degrees Fahrenheit.
- Maintain a minimum distance between the nozzle and the vehicle of 12 to 14 inches.
- Spray at a 45-degree angle with a sweeping spray.
- Turbo pressure nozzles should be avoided.
- Damaged wraps and wrap seams should not be sprayed.
VEHICLE WRAP REPLACEMENT
Vehicle wraps only last a certain amount of time, even with the finest care. Here are a few reasons why you may wish to take your wrap off:
- The car wrap is beginning to exhibit symptoms of deterioration, such as stains and lifting.
- You’d want to change the look of your website.
- Changes in the company’s branding
- You’re getting ready to sell your car.
- You want to get the word out about a new product or service.
- The good news is that, whatever the cause, the car wrap may be removed without causing damage to the paint. This is one of the advantages of using a wrap rather than a paint job.
Vehicle wraps are an excellent method to promote your company’s goods and services. They can look excellent and endure a long time with a little additional care, making them a wonderful investment for both big and small businesses.
Contact us for additional information about car wrap care or to have a car wrap fitted on your vehicle. Our skilled team members will be happy to answer any queries you may have.
